A biochemical filter is a water treatment device that uses an aerobic or anaerobic process to remove impurities from water. The process is typically a three-step system: adsorption, oxidation, and sedimentation. The biochemical filter is an effective method of filtration for aquariums that use various types of chemical media to remove waste, harmful substances, and pollutants from the tank in order to keep the water clean. Biochemical filters can be easily set up using biological and mechanical filtration.

The process of treating water with a biochemical filter starts with the addition of chemicals like oxidizing agents or enzymes that cause the formation of hydrogen peroxide. This in turn leads to the formation of free radicals which can bind to other molecules and cause them to break down into smaller units.

The next step in this process is adsorption. In this step, the free radicals attach themselves to dirt particles in the water and help pull these particles out so that they can be removed from your water supply. Finally, there’s sedimentation—this step involves letting gravity do its thing so that any particulate matter left over from adsorption will sink down into a filter bed where it can be easily removed without affecting the quality of your drinking water.

Description of Biochemical Filter

Biochemical filters are used to remove suspended particles from water. They help remove particulate matter, such as dirt and silt, that could clog the intake of other filters or be harmful to aquatic organisms within your aquarium. These chemicals may also prevent unwanted odors from developing in your aquarium.

Biochemical filters are a type of biological filter. In this kind of filter, bacteria break down organic matter like fish waste and uneaten food into nutrients for plants and animals alike—a process called nitrification.

Types of Biochemical Filter

Biochemical filters come in many shapes and sizes, but the two main types are:

  • Activated Sludge – This is a biological oxidation process that uses a combination of oxygen, air, and microorganisms to remove pollutants from water. It’s usually used for high-strength wastewater treatment.
  • Fixed Film – This type of biochemical filtration uses a film of growing bacteria that forms on the media bed to remove contaminants from wastewater by absorption and adsorption. The most common fixed-film filters include trickling filters (where all the effluent passes through every few minutes) and rotating biological contactors (which pump some of the aerations back onto themselves).

Specifications of Biochemical Filter

  • Filter size: The size of the filter is usually expressed in length (or diameter, or another shape) and in area. Filters can be designed to achieve a specified filtration rate per unit of pressure drop, or they can be designed to achieve a specified percentage removal efficiency.
  • Flow rate: The flow rate is also called “throughput” and is expressed in volume/unit time (l/s). An important characteristic of a biochemical filter is its hydraulic residence time (HRT), which refers to how long it takes for water to pass through the media.
  • Pressure drop: The pressure drop across any component of an industrial system must remain below a certain threshold value if it is not going to affect downstream processes negatively. In general terms, low-pressure drops are preferable because they allow higher flow rates than high-pressure drops do; therefore, choosing materials that lead to lower pressure drops should improve overall performance by increasing throughput and decreasing HRTs as well as reducing space requirements for equipment design purposes such as piping layouts etc., which means less capital costs upfront when building new facilities from scratch but also potentially less operation & maintenance expenses due fewer repairs needed later on down line after years have passed since construction ended because there were no major faults present during initial inspection stages before opening doors first day open sales were announced publically online news outlets articles written published released via print newspaper editions alongside magazines subscribers reading pages turning turning pages reading articles reading stories reported writing articles reporting stories telling tales describing happening events happening happenings occurred sightings sightings’ sightings’

Maintenance of Biochemical Filter

  • Regular cleaning of the filter is necessary to keep the microbes healthy and active.
  • Remove all bio-filter media, rinse and clean it (if necessary) until it is rinsed clean of debris.
  • Replace all bio-filter media according to the manufacturer’s instructions.
  • Replace a full set of filter cartridges every 1-2 years or as needed depending on use, water quality, and container size.

A thorough cleaning once a month will help maintain a healthy biological filter bed in your system by removing accumulated organic matter that could cause anaerobic conditions which cause harmful odors or tastes in your drinking water.

Price of Biochemical Filter

The price of a biochemical filter depends on what type of filter you’re buying. The average cost is between $200 and $300, but this can fluctuate depending on the brand, size, and other factors.

The price of a biochemical filter in India is around Rs 30000 to Rs 50000. In Bangladesh, it ranges from Tk 12000 to Tk 15000 while in Nigeria it’s N400000 to N5 million. In Ghana and Malaysia the cost range is between GH¢1500 and GH¢2500; MYR800 to MYR1000 respectively

In conclusion

In conclusion, the biochemical filter is often regarded as the most important in a successful tank setup. It removes toxins from aquarium water and breaks down fish waste. This leads to better water quality and healthier fish in your tank. The algae growth can also be reduced by using this filter.

Leave a Comment

Your email address will not be published.

error: Content is protected !!