Drip Tape Pressure Regulator Lots of water pressure is great when you’re taking a shower or washing the dishes. But it’s not so great when it comes to drip irrigation. Pressure that is excessive can damage a drip irrigation system. Pressure regulators reduce incoming water pressure to a set pressure usable by a drip system.
A pressure regulator is used when the incoming pressure is too high for the emitters or fittings. The flow rate of the regulator should be matched with the system. Pressure regulation does not take effect until the minimum specified flow passes through the regulator. To ensure the right rate of drip, pressure regulator choices include low-flow, medium-flow and high-flow. Whether you’re looking for a 1 1/2-inch drip irrigation pressure regulator or something else, we can help you find what you’re searching for.
Pressure regulators should be placed after valves or shutoffs. They may be damaged if left under constant pressure, unless stated otherwise in their product descriptions. This 12 PSI Pressure Regulator is a necessary component of any drip tape irrigation system. In order to use drip tape to water your vegetable garden, you must decrease the pressure from your water source so that the the low pressure drip tape can handle the water supply being delivered to it. Install the pressure regulator directly downstream from the filter on your drip irrigation system.
Uses/benefits of Drip Tape Pressure Regulator:
1.Remain the same pressure of outlet envn if the pressure of inlet is changed greatly or the flowing of outlet is variable
2.Fixed inductive diaphragm inside, reaction sensitivity and High accuracy of Pressure regulation.
3.Large flowing channel without ratainer, Smooth surface inside with low friction.
4.Produced by Reinforced plastic material with excellent hydraulic and mechanical function.
1.Working Pressure: 1″ 20-150PSI (1.3-10Bar)
2.Installation after filter to protect the drip system or microsprinler damaged by high pressure.
3.Also Suitable to be fixed before sprinker for pressure compensation and uniform flowing.
4.Five type flowing available 15,20,25,30,40PSI to meet different requirement.
Features of Drip Tape Pressure Regulator:
- Suitable for retro-fitting sprinkler zones, faucet, hose, or gravity feed – For installation above grade, in a Bubbler Box or in a green house
- SIZE: 3/4″ FHT x 3/4″ MHT (Hose Thread)
- REGULATES TO 25PSI : Pressure Compensation Range: 30-100 PSI
- TO PREVENT LEAKS! : CONSIDER USING ONE OF OUR KITS WITH A BACK-FLOW PREVENTER WHEN ATTACHING TO A FAUCET : Minimum filtration – 150 mesh
- QUALITY CONSTRUCTION : High Impact UV Resistant
|Main material of parts
Prices of Drip Tape Pressure Regulator:
$14.99 – $34.275