How To Rig A Tube Jig For Lake Trout

Rigging a tube jig is an essential part of catching lake trout. You can get away with not having any other rigging, but your success rate will be much lower than if you have it.

It’s important to understand that lake trout are more sensitive than other species of fish and they will feel the difference between a plastic worm and a live minnow. If you don’t have good rigging, then you are missing out on the ability to catch a lot more fish.

The first thing that you need to do is attach your hook to your line. The second thing that you need to do is make sure that you have enough weight on your line so that it sinks into the water and doesn’t float away from where you want it to go. The third thing that you need to do is tie off the end of the tube jig so that it doesn’t unravel or come apart during fishing trips.”

How To Rig A Tube Jig For Lake Trout

If you’ve never fished a tube jig for lake trout, you should learn how to rig one by reading this article. This article will discuss rigging a Weightless tube, Stinger jig, and a variety of other jigs. Then, you’ll know how to properly adjust the weight of your jig head.

Weightless tube

To fish for lake trout, you must know how to rig a weightless tube jig. This is a great lure for targeting fish and can be rigged for deep or shallow waters. Its unique action is attractive to almost every species of predator and panfish. It has been used to catch largemouth and smallmouth bass, channel catfish, yellow perch, and even walleyes.

There are two common ways to rig a tube jig. The first method involves inserting the jig head into the hollow body of the tube. This method is common for smaller tubes, such as the 3″ variety used on spinning tackle. The jig head tucked inside the tube is great for finesse fishing in clear water. The jig head’s position greatly affects its action. Tubes with the head pushed forward tend to fall faster and have less spiral action.

Another option is to rig a weightless tube jig with a weightless Texas rig. This rig is great for heavier soft plastic baits and is also a weedless rig. You can also rig a soft plastic worm with an offset shank worm hook. In addition to rigging your weightless tube jig for lake trout, you can also try a soft plastic worm.

Weightless jig

When fishing for bass, weightless jigs are an excellent choice. They imitate a helpless baitfish, and they work well when fished near the surface. If you’re hesitant to break the surface to cast, try a weightless rig to lure fish to strike. It takes a few seconds for the bait to descend per foot of water. When you’re ready to cast, simply flick the tip of the rod to move the bait and let it flutter downwards.

The weightless rig is best used in shallow water or in sheltered areas with very little current. The main benefit of fishing with a weightless rig is that it’s more likely to get a strike during the descent of the bait. It’s also a great choice for weedless rigging, allowing you to work around vegetation and cover. And despite the name, weightless rigs are not limited to lake trout.

Stinger jig

If you’re trying to catch lake trout, one of the best jigs to use is the Stinger rig. This type of jig should be fished at the proper depth with your fishfinder showing lakers. It’s an effective rig for a variety of reasons. It allows you to cast far distances without having to worry about getting out of position or moving to another location while you wait for a bite. Besides, it’s also one of the simplest ways to catch lake trout.

The stinger hook is usually bent perpendicular to the bait to attract more fish. The line that ties the stinger to the jig should be short enough to make the hook easy to turn when changing plastics. You can use more than one stinger at a time, depending on the plastics you’re using. If you’re fishing in a large lake, you can use a treble hook. Using a dead bait is another way to catch fish.

Weight of jig head

When fishing soft plastics, it is important to use the proper weight of jig head. The wrong weight will not get your lure to the fish and a heavy jig head will snag the bottom, which is expensive. If you’re fishing too light, you can just wind your line faster. But if you’re fishing in fast water, you need to use a heavier weight jig head.

One of the first things to remember is the type of water you’re fishing in. While fishing in still water, a small jig head is good enough to catch trout. However, if you’re fishing in flowing water, you should go with a jig head of 1/16th of an ounce. And if you’re fishing on a deeper grass flat, a 1/4 ounce jig head is needed.

Another thing to consider is the type of fish you’re targeting. While lakers are generally considered to be slow-moving fish, they can be aggressive enough to slam a fast-moving jig as it rises. A jig head of 1/2 ounce can also work for these fish. You’ll want to keep the jig within a few feet of the bottom. The correct jig head weight will determine how easily you’re able to land a fish.

Size of stinger hook

The size of the stinger hook on a tube nymph depends on the species of fish you are targeting, and in colder water, it is important to choose the correct size. In warmer waters, the stinger hook is not as effective, but it can still get the job done. You can choose a smaller or larger size if you are targeting lake trout.

If you are tying the stinger hook on your jig yourself, you can make it in no time. First, you need to purchase a few no. 10 and 12 treble hooks. Next, you should also purchase small clips, line connector sleeve, and ten to twelve pound fluorocarbon line. You can also purchase a quality round bend treble hook in bronze or other fish-attracting colors.

The size of the stinger hook on a tube or hair jig for lake trout is very important. A small size is best for smaller fish, and a large size will not be effective for larger ones. Try tying one with a ten inch swimbait, preferably a 10-inch long bait. It is also important to check the depth of the lake and time of the year before you start fishing.

Size of jig head

The size of jig head you use is very important when trying to catch lake trout. A larger head will attract more fish, while a smaller one will only bring in a few fish. You can also use a tube jig as a feeder lure. Ensure that the jig head is appropriate for the depth of the lake and the time of year you’ll be fishing.

If you’re fishing on a deep pier, dock, or bridge, you need to use a larger head. The currents and friction in the water can affect the performance of smaller heads. If you have several types of jig heads, it’s essential to use them in different situations. Otherwise, you might find yourself struggling to set the hook. The best way to avoid this is to buy different sizes for different environments.

Choose a jig head that’s small enough to fit over a tube. Larger heads are better for big fish, while smaller heads are better for smaller ones. If you are unsure about the size of a jig head for lake trout, you can try using a small tube. If the lake trout is smaller, you can also use a large head.

Size of stinger hooks

The size of stinger hooks on a lake trout tube jig is critical. The stinger hook should be about three inches long and the treble hook should be at least one inch shorter. This will allow the angler to entice more fish and land more trophies. To use a stinger hook on a lake trout tube jig, choose a no. 10 or 12 treble hook, small clips, and line connector sleeves. Ten to twelve pound test fluorocarbon line is also recommended. Choose a quality round bend treble hook in a bronze or fish-attracting color.

Lake trout are sensitive to taste and smell. Using a stinger jig is an effective technique, especially when you are fishing on ice. Choose a jig head that matches the depth of your lake and the time of year you plan to use it. A large stinger hook will help you land more bait. Whether you use a jig head or a tube jig, the smallest size is fine, and the largest stinger hook is ideal for vertical fishing.


Many anglers find success by using a scent-soaked tube jig. The scent helps trigger a strike and encourages the trout to cling to the lure. This gives the angler a few extra seconds to set the hook. It is also a great lure to use near rocky structures. There are several ways to use scent-soaked tube jigs.

The best scent for fishing for lake trout is natural, so it’s important to choose the right scent. A white tube with a scented scent works best. Silver jigs also work well. For shallow water, a bucktail jig is a good choice. For more advanced anglers, scented PowerBait Tubes are particularly effective.

Adding a tube jig to your lake trout fishing tackle is an easy way to catch more lake trout. Lake trout are sensitive to smell and taste, and will hold on to a scented tube for longer. When using a tube jig with a jig head, choose one that matches the depth and time of year you’re fishing.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.