Milestone herbicide is a broadleaf herbicide that controls weeds on residential, commercial, and industrial sites. Milestone herbicide contains sulfentrazone, which prevents a plant from growing when applied to the leaves or roots. Milestone kills existing plants within hours of application and suppresses new growth for up to three months. It’s safe to use around desirable plants and may be used in home vegetable gardens, but read the label carefully before using it anywhere else.
Milestone herbicide is a liquid formulation that controls woody brush and weeds. It’s labeled for consistent and dependable control of susceptible plants, plus it enhances the control of tank mixes in nearly any application. The residual control provided by Milestone reduces the number of treatments needed, making it easier to achieve your goals.
Milestone Herbicide Active Ingredient
Milestone Herbicide contains a formulated product with the active ingredient aminopyralid, which was developed and patented by Dow AgroSciences for the purpose of eliminating broadleaf weeds.
It is used in combination with other herbicides such as dandelion root and pendulous acid. This herbicide has an excellent residual effect on broadleaf weeds and is a low-toxicity option for use on bare ground. It should be applied to plants at rosette to bolting stages in the growth cycle. Milestone can also be used on a variety of benign sweet peas and grasses such as Oxeye daisy and Diffuse knapweed. Moreover, it contains no 2,4-D odour and provides flexibility for tank mixes for bare ground applications.
One of the most important ingredients in Milestone Herbicide is non-ionic surfactant. This herbicide is not recommended for small applications. You should also check with the manufacturer to confirm whether it is suitable for your particular needs. If it is not, don’t buy it. It is safe for most gardeners, but it is not for sensitive areas. A non-ionic surfactant is necessary for its application.
Milestone Herbicide is used to control broadleaf weeds such as dandelion and clover in lawns, turfgrass sod farms, and home gardens. It will not kill grasses like crabgrass or bentgrass; however, when it comes into contact with these types of grasses they may turn yellow before dying out.
What Is Milestone Herbicide Used For
Milestone Herbicide is an herbicide that is used to control broadleaf weeds, grasses, and other plants. It also helps control some shrubs and trees. Milestone herbicide can be used on pastures, hayfields, roadsides, and rights-of-way.
Milestone Herbicide comes in liquid concentrate or ready-to-spray formulas for use in agricultural applications by professional applicators only.
How does Milestone Herbicide work?
Milestone Herbicide a systemic herbicide, meaning it moves through the plant and into its roots. It accumulates in meristematic tissues, which are the parts of the plant that grow new leaves, branches, and roots. And once it gets there? It interferes with the metabolic pathways that control growth. The disruption of those pathways causes a chain reaction that results in the control and death of susceptible plant species.
Milestone herbicide is absorbed by plants through their roots and leaves. Once absorbed, it travels to all parts of the plant including stems, flowers and fruits. Once it reaches its destination, it inhibits the production of a specific enzyme that is necessary for photosynthesis to occur. Without this enzyme, photosynthesis cannot take place and the plant dies from lack of food supply.
The amount of time it takes for Milestone Herbicide to kill a plant depends on several factors such as climate conditions, type of weed being treated and rate used among other things. The recommended application rate of Milestone herbicide is 7 fl. oz. per acre per year in at least 20 gallons of water.
How To Apply Milestone Herbicide
This broadleaf weed killer is labeled for dependable, consistent weed control. Its flexible formulation provides long-lasting weed control and leaves little to no damage to desirable cool season grasses. It is particularly effective against weeds and other invasive species on rangeland, non-cropland areas, and non-irrigation ditch banks. Application methods for Milestone Herbicide are as follows:
#1. Broadcast Method
It’s a fine idea to apply Milestone at the recommended rate of 7 fl. oz. per acre in at least 20 gallons of water. Apply it as a coarse low-pressure spray, and spray volume should be sufficient to uniformly cover the foliage. If your target vegetation is tall and/or dense, increase the spray volume to ensure thorough coverage by using more than 10 gallons per acre.
You may add an approved non-ionic agricultural surfactant to the spray mixture as recommended by the surfactant manufacturer. And never apply this product with mist blower systems that deliver very fine spray droplets because it will reduce control achieved with Milestone, and increase drift potential.
#3. Foliar Application:
Heavy foliar feedings can be applied at rates equivalent to broadcast up to a maximum of 7 fl oz per acre per annual growing season. Spray enough to get your plants nice and wet, but not so much that you’re drowning them in chemicals. A non-ionic agricultural surfactant may be added to the spray mixture as recommended by the surfactant manufacturer. Repeat applications may be made, but don’t go overboard; total use should not exceed 7 fl oz per acre per year.
One of the safest, least expensive, and most convenient methods of applying Milestone Herbicide to a variety of tree species. Hack-and-squirt herbicides do not have restrictions on when to apply them before haying or grazing. Nonetheless, consult the herbicide label to determine if you need to use Milestone Herbicide around dairy animals. In the case of the latter, it is best to use hack-and-squirt methods instead.
Milestone Herbicide Spot Treatment
-Spot-treat weeds by hand. The best time to treat weeds is when they are young and small before they have a chance to grow and become established in your lawn or garden.
-Use a sprayer. When using a sprayer, make sure the wand is fully extended and the nozzle is adjusted so that it will not target an area of over 6 inches wide when spraying the herbicide solution.
-Mix the herbicide solution according to the label instructions. Mixing instructions vary among brands of herbicides; read them carefully before adding any product to your sprayer tank.
-Add water until you reach an even ratio with no more than two parts water to every one part herbicide mixture (e.g., 2 gallons). This is called making up your mix, it’s important for ensuring that everything mixes evenly together.
-Spray according to label instructions, this means making sure you’re covering all areas that need treatment while avoiding those places where plants won’t be damaged by toxicity from the application (like sidewalks)
What weeds are controlled by Milestone?
Milestone herbicide is a broadleaf weed killer that controls many types of weeds, including dandelion and clover. It is effective on many other common lawn and garden weeds such as chickweed, henbit, spurge, and knotweed, Amaranth, Cinquefoil, Crownvetch, Fleabane, Hogweed, Ironweed, Knapweed.
Milestone controls a wide range of weeds in lawns, pastures, and around ornamental plants. It’s safe to use on established turfgrass including bermudagrass (Bermuda), tall fescue (fescue), and Kentucky bluegrass (bluegrass).
Is this product safe to use on cool-season grasses like tall fescue, bluegrass, and ryegrass?
Milestone Herbicide is safe for use on cool-season grasses. It is not recommended for warm-season grasses, such as bermudagrass or centipedegrass.
How can I reduce the chances of crop injury when applying Milestone?
To help reduce the chances of crop injury when applying Milestone, use a sprayer with a fan tip. Also, avoid spraying during windy conditions, as this may increase the risk of crop injury.
Avoid spraying when temperatures are above 85 degrees F and humidity is high (above 75%).
Also, avoid spraying when plants are under stress such as in drought or following an insect outbreak that has left plants weak and susceptible to weed resistance.
Can I apply Milestone to established bermudagrass or centipedegrass lawns?
Although Milestone can be used to control weeds in established bermudagrass and centipedegrass lawns, it is not recommended. This is because mild surfactants tend to cause injury to turf when used at high rates. The recommended rate of Milestone Herbicide for turfgrass applications is 0.5 fl oz/1,000 sq ft (0.5 mL/1,000 sq m) per application.
It should also be noted that Milestone Herbicide can be applied before or after seeding has taken place; however, it is always best to avoid putting chemicals on new seedlings until they have developed a root system and become established in the soil
Will Milestone Herbicide Kill Trees
Milestone is a contact herbicide that will kill trees. Do not apply Milestone to any tree type or within 10 feet of the trunk of any tree. This includes both coniferous and deciduous species, as well as all fruit trees (e.g., apples, cherries, pears, etc.).
If you plan to use Milestone Herbicide for weed control in an area where there are trees, be sure to read the label carefully before using it.
Milestone Herbicide Mixing Ratio
Milestone is a versatile herbicide that can be used to control many broadleaf and woody weed species. To get the most out of your Milestone application, make sure you know how much to mix in water.
For broadcast applications, apply Milestone in the amount recommended on the product label. The amount of Milestone (fl oz or milliliters) corresponding to the desired broadcast rate varies depending upon the spray volume required to treat 1000 sq ft. A delivery volume of 0.5 to 2.5 gallons per 1000 sq ft is equivalent to 22 to 109 gallons per acre.
Milestone Herbicide Label
Milestone Herbicide is a selective postemergence herbicide that controls annual and perennial broadleaf weeds, grasses, and sedges in corn, wheat, sorghum, soybeans, cotton, and peanuts. Milestones may also be used on turfgrass in non-crop areas such as fairways or golf greens.
Milestone provides control of more than 100 weed species including annual bluegrass (Poa annua), bermudagrass (Cynodon spp.), cleavers (Galium aparine), dandelion (Taraxacum officinale), goosegrass (Eleusine indica), hemp dogbane (Apocynum cannabinum) lambsquarters/ pigweed (Chenopodium album), purslane spurge milkweed morning glory mustard pusley pigweed poppy sowthistle chamomile clover crabgrass dock dock foxtail fern leafy spurge ground ivy groundsel marigold horsetail oxalis witch grass lawn weed yellow wood sorrel sawtooth wild oats.
Before using Milestone herbicide, you should be familiar with its label precautions. This herbicide can damage sensitive broadleaf crops, and it is only safe to use on farmland. Milestone does not break down in plants, and so hay and pasture from treated areas can contain residues. Moreover, if you intend to move livestock from the treated area, you should follow the instructions on the label.
The molecule that makes Milestone Herbicide so effective is aminopyralid. It is a non-volatile herbicide that provides long-lasting weed control. However, it may damage native plants. This is why it is beneficial to wildlife organizations, pollinators, and livestock owners. This herbicide label precautions will help you apply the product properly. If you are not a professional land manager, you should consult with your local extension office for help and advice.
The labels for Milestone Herbicide include an extensive list of possible reactions with the product. If you plan to spray this herbicide, be sure to read the label carefully. In addition to being safe for wildlife, it is also harmless to native plants. Using this herbicide is an excellent solution for tough-to-control weeds. In fact, it can work well with other herbicides, including grasses.
As with all herbicides, it is important to read the label. You should use a sprayer with sufficient water to ensure an even coverage of the product. You should also remember that you should dilute Milestone Herbicide before applying it. This herbicide can be applied to grassy areas in moderate amounts, but the amount of liquid you need depends on the height and freshly cut vegetation on your land. If you have a larger area to treat, you should use a professional pesticide spray rig.
Where can I apply Milestone for control of multiflora rose or Japanese honeysuckle in pastures or hayfields?
Milestone herbicide for control of multiflora rose or Japanese honeysuckle in pastures and hayfields should be applied in the fall, just before the plants go dormant. In some areas, you can apply it to actively growing plants at any time during spring or summer. Check the labels for exact instructions on how to use this herbicide under your conditions.
When can I cut hay after an application of Milestone?
After application, wait for Milestone to kill the weeds before cutting hay. This usually takes about 3 weeks from application. Forage from fields with sensitive crops like soybeans, alfalfa, and clover should not be harvested for feed or bedding until the crop has fully emerged and is growing vigorously.
Environmental toxicity
Milestone herbicide is a liquid weedkiller distributed by Dow AgroSciences. It provides superior broadleaf weed control at low use rates and is classified as a Reduced-Risk compound. It can be used on pastures and rangelands to kill broadleaf weeds. The main ingredient in Milestone is aminopyralid, a patented chemical. Milestone can cause health risks for humans if it enters the soil.
Exposure to Milestone herbicide may cause eye irritation or discomfort. The Materials Safety Data Sheet for this herbicide contains more information. After applying Milestone herbicide, wash the eyes thoroughly with water and remove contact lenses. If eye symptoms persist after several minutes, see an ophthalmologist. Before applying Milestone, wear long-sleeved clothing and gloves. When handling this herbicide, stand upwind.
As a persistent herbicide, Milestone persists in the environment. It should not be used in watershed areas. Moreover, it might violate the Integrated Pest Management Policy of San Francisco. So, we recommend against using Milestone herbicide on any land that is near a creek. Moreover, it’s important to remember that the use of this pesticide is prohibited in the state of New York. The watershed is the most affected area by Milestone.
Because it persists for a long time in the environment, it can enter the food chain via manure. Despite temporary suspensions in several countries, incidents of contamination continue to occur. These situations make it important for regulators to implement a strict program of stewardship to ensure the safety of the public. This herbicide remains in the food chain and should be avoided, if not completely eliminated. But, the question remains, should Milestone herbicide be banned? If the answer is yes, where can we get more information?
You can control broadleaf weeds with Milestone herbicide.
Milestone Herbicide is a selective broadleaf herbicide that can be used to control weeds in a variety of crops. It’s also known as S-metolachlor, an active ingredient belonging to the group of chemicals known as auxin herbicides. It’s considered a contact and systemic herbicide that works by stopping the growth of weed plants by interrupting their photosynthesis process.
Milestone Herbicide has no residual activity; it does not remain in the soil after application and does not move through the soil or groundwater. The chemical doesn’t have any effect on grasses except under certain conditions where there is a high concentration present at the time of application (i.e., rainfall occurring within 24 hours).
In conclusion
We hope we’ve given you enough information to help make your decision. As always, remember that the best way to keep your yard healthy is by keeping it well-maintained and watered. If you have any questions about how Milestone Herbicide can help you with this task, be free to use the comment section.