Winter is a tough time for your lawn. It’s cold, it’s wet, and the ground is frozen. Your grass is going to be looking a little worse for wear. But don’t worry. We’ve got you covered with our Scotts Winterguard Weed and Feed Program. Scotts Winterguard Weed and Feed is a two-part program that ensures that your lawn will be ready for springtime. The first part of the program is a pre-emergent herbicide that prevents weeds from sprouting up on your lawn before they even have a chance to germinate. The second part of the program is a fertilizer that helps your grass grow strong and green all winter long.
Scotts WinterGuard Weed and Feed

Scotts Weed and Feed is a convenient, all-in-one lawn care product that provides broad-spectrum weed control and feeds your lawn. It is ideal for use on most types of turfgrass including Kentucky bluegrass, fescue, bermudagrass, and zoysia. This product can be applied at any time of year to help control weeds and improve lawn health.
Scotts Weed and Feed is a product that kills weeds, feeds your lawn, and makes it look nice. It’s easy to use, especially if you have Scotts Lawn Care Services. We’ll come out and spray the weeds for you so all you have to do is wait for them to die.
In the spring, Scotts Weed and Feed is used to prevent annual weeds from germinating in the spring. The best time to apply Scotts Weed and Feed is when it’s warm enough for new grass seed to germinate but cold enough for most annual weeds not to grow yet. If you apply too early in the spring, you may get a few weeks of good germination before it gets hot again and kills the new seedlings. If you wait too long after the last frost date (usually early May), weeds will have already germinated and actively growing by the time you apply Scotts Weed and Feed or they’ll start growing soon after application so you won’t get as much benefit from spraying them with this herbicide.
The best time for using this product is any season except winter. In spring when the temperature exceeds 40 degrees Fahrenheit (4 Celsius) we recommend applying Scotts Weed & Feed once a month until early summer when temperatures exceed 100 degrees F (40C). In late spring/early summer when temperatures exceed 80 degrees F (27C), apply every other week until early fall when they reach 50 degrees F (10 C).
Scotts Winterguard And Overseeding
As you may already know, Scotts Turf Builder Winter Guard is a winter lawn care product that helps kill weeds and feed your grass in one go. It can be safely used on any type of lawn.
If you have a small area of your lawn that needs some extra attention, then Scotts Winterguard and Overseeding could be the perfect option for you. This product will aerate your soil so it can receive nutrients from above, which means more growth for your turfgrass. Plus this method doesn’t require any digging into the ground whatsoever; making it an ideal solution for those who are less handy with tools or don’t have time to spare.
This special blend combines fertilizer with beneficial bacteria (its secret weapon) to improve overall root health while also fending off disease-causing organisms like fungus or mold spores that could otherwise destroy your beautiful blades before they even get started growing tall enough so as not only see them but appreciate them too.”
Scotts Turf Builder WinterGuard Fall Weed and Feed
Scotts Turf Builder WinterGuard Fall Weed and Feed is a great product to use in the fall. It’s safe to use on your lawn if you apply it correctly, but it can be harmful if you apply it too early or too late. If you’re not sure when to apply Scotts Turf Builder WinterGuard Fall Weed and Feed, read this guide. We’ll tell you what happens when you spray it too soon, how much Scotts Turf Builder WinterGuard Fall Weed and Feed is needed for your lawn size, and more.
Scotts Winterguard And Overseeding
Scotts Winterguard Weed and Feed is a great way to kill weeds and feed grass. It helps your lawn grow thick, green, and healthy while it prevents any new weeds from sprouting. The Scotts Winterguard Weed and Feed is gentle enough that it won’t harm the entire plant, but will instead kill just the top growth of weeds. With this weed killer, you can stop worrying about annoying dandelions or crabgrass ruining your lawn in spring or summer.
The Scotts Winter Guard Weed & Feed comes with a special formula for overseeding in fall/winter months which works well with both warm season kinds of grass like Bermuda or St Augustine as well as cool season grasses like Kentucky Bluegrass. This weed and feed product contains many nutrients including iron so it’s perfect for getting lush green lawns. You’ll notice results within days after applying this fertilizer: no more brown patches on your lawn.
Scotts Turf Builder WinterGuard Fall Weed and Feed
Scotts Turf Builder WinterGuard Fall Weed and Feed is a fall-applied granular product that contains a unique winterizer to prevent the growth of weeds during the cool months. This low-nitrogen fertilizer will help produce healthier turf, giving your lawn more time to recover in the spring when most weeds emerge. It’s also an excellent choice for applying to areas where you have heavy summer ground covers, such as Bermudagrass or St Augustinegrass.
The product must be applied in late October or early November (the ideal time being around Halloween), so you’ll want to make sure you’re planning on doing that before it’s too late, if your grass has already started growing back from dormancy, there’s no need for this treatment at all.
Best Time To Apply Scotts Winterguard Weed And Feed
To ensure that you get the most out of your Scotts Winterguard Weed and Feed, it’s best to wait until the temperature is over 60F. If you apply it when it’s colder than this, you’ll have to water in the product. If this is something that will be difficult for you (or if there’s no rain forecasted), consider using a spreader that throws the product out in a wide pattern instead of one that drops it straight down from above. This will help keep moisture from getting trapped under the weed killer, which can make it more difficult for your lawn to absorb nutrients and also cause damage to nearby grasses as well as any other plants growing in your yard.
How do I use Scotts Turf Builder Winter Guard?
Using Scotts Turf Builder Winter Guard is easy. Just follow these basic steps:
Make sure you have the right product for your lawn. If you’re not sure what kind of grass you have, ask us. We can help determine which product is best for your needs and make sure it will work well with your current maintenance routine.
Use the correct amount. As with any weed and feed herbicide, it’s important to apply enough fertilizer so that the grass will get all of its nutrients, but not so much that it burns, and remember: The label instructions are there for a reason. If they say 2 ounces per 1000 square feet, don’t skimp on those ounces. More isn’t necessarily better when working with chemicals like this one, in fact, it could be dangerous to both pets and humans if misapplied or used improperly (which would be against federal law).
Use the correct application method: For example, Scotts Turf Builder Winter Guard should only be applied as a spot treatment (not broadcast over large areas) because leaving more than 1 inch between treated areas keeps pets from coming into contact with toxic residues left behind after application has been completed; therefore reducing exposure risk significantly while still giving effective control of weeds without harming any plant material itself.
How long does it take for Scotts winterguard to work?
As a slow-release fertilizer, Scotts WinterGuard will take up to 6 weeks to work. This means that you won’t see results right away, but if you apply it at the right time of year and keep up with your lawn care routine, it should start working sooner than later.
If you want to get the most out of your Scotts WinterGuard application and make sure it’s getting where it needs to go, consider adding an aeration service as well. Aeration helps loosen compacted soil in order for nutrients like nitrogen and phosphorus (the two main components in Scotts WinterGuard) to reach roots more easily. It also improves drainage by creating air pockets that let water flow through better when it rains or snows.
How do you apply Scotts winterguard?
- Using a spreader, apply Scotts WinterGuard in early fall before the first killing frost, or when dormant shrubs are showing signs of new growth.
- Spread evenly over the entire area and water thoroughly after application to help ensure good coverage and contact with all areas of the soil surface. For best results, follow up with additional applications at four-week intervals throughout the winter to prevent weeds from sprouting.
- Spread Scotts WinterGuard so that it covers about 1/4 – 1/2 inch deep for perennials or groundcovers and 3/4 – 1 inch deep for shrubs, trees, and vines (depending on species).
Should You Water After Applying Scotts Weed And Feed
When you apply Scotts Winterguard, you don’t need to water afterward. This is because winter guard contains a slow-release fertilizer that will slowly feed your lawn over the next few months.
It’s important to note that Scotts WinterGuard weed and feed is not just a weed killer; it also contains fertilizer for your lawn. The fertilizer in this product will nourish your grass through the winter months, so there’s no need to apply any further fertilizer in the fall or spring after applying Scotts WinterGuard.
When To Apply Scotts Fall Weed And Feed
The best time to apply Scotts Fall Weed and Feed is in late summer or early fall when weeds are actively growing. At this point the soil is warm enough that the weed killer will be absorbed quickly by the roots of your lawn. If you choose to apply it earlier in the season, there’s a chance that some of these weeds will still be green when they come into contact with the fertilizer, which could prevent its full effectiveness.
On top of that, if you wait until after all of your weeds have turned brown and died, when they won’t absorb any nutrients from your fertilizer, you may end up with patches of dead grass where nothing has been planted yet. This might not seem like a big deal now but think about how much easier it will be on yourself when spring rolls around again next year: no more pulling out dead plants by hand.
Can I Use Scotts Winterguard In Spring
Yes, you can apply Scotts WinterGuard in the spring as long as temperatures are above 60°F. However, because it’s effective at killing broadleaf weeds and grasses, and because you won’t be able to water your lawn for a few days after application, we recommend waiting until the temperatures are warm enough.
If you do decide to use Scotts WinterGuard in the spring, don’t water your lawn for 48 hours after application.
How do you apply Scotts winterguard?
Apply Scotts WinterGuard to your lawn with a spreader. For best results, spread the application evenly over the entire lawn area. When applying Scotts Winter Guard, make sure you get it evenly distributed throughout your entire yard so that you don’t miss any spots when putting down fertilizer on the grass that needs it most.
Before you begin, make sure you have a spreader. Scotts winterguard is available in both granular and liquid forms. This means that it’s convenient to apply the fertilizer with a spreader or even by hand if necessary. The key is making sure that you get the fertilizer evenly distributed over your lawn so that there are no bare patches of ground or spots with too much fertilizer applied (which could kill your grass).
The Scotts WinterGuard fertilizer comes in two different bags, one has fertilizer and the other has weed killer. You want to be sure you use both bags together if you’re applying in late fall or winter so that they are mixed together before they hit your yard.
When applying Scotts winter guard, it’s important to follow the directions on the packaging carefully. Typically, they recommend using 2 pounds of product per 1,000 square feet of lawn space. If using liquid form Scotts winterguard mix at 2 ounces per gallon of water to achieve this rate of application-this will help prevent runoff into storm drains or other bodies of water which can cause harm to fish and other wildlife.
What temperature to stop fertilizing lawn?
The best time to apply Scotts Winterguard Weed And Feed is when the temperatures are between 40°F and 80°F. During these temperatures, your lawn will be more receptive to the nutrients in the Scotts Winterguard weed control product.
If you apply Scotts Winterguard weed control when the temperature is below 40°F or above 80°F, you may not get as much control over weeds as you would during cooler weather.
What temperature is too cold to fertilize grass?
When temperatures are below 60F, you shouldn’t apply Scotts WinterGuard. The reason is that grass needs to be at least 60 degrees Fahrenheit in order for the fertilizer to work properly. If it’s too cold out, the grass will not be able to absorb all of the nutrients in the fertilizer and could end up with damaged roots. Additionally, applying a weed killer when it’s below 60F can cause burning and damage your lawn overall.
Can you put weed and feed on frozen ground?
Scotts Winterguard Weed and Feed can be used on frozen ground. However, it’s important to note that no fertilizing should be done when the temperature is below 60F.
If you do fertilize in cold weather, there’s a risk of burning your grass. This can lead to dead spots and an uneven lawn. While this is not harmful to humans or pets (weirdly), it does mean that you don’t have a healthy-looking lawn in the springtime when everyone else will be admiring yours from afar.
To Recap,
Scotts WinterGuard weeds and feed is a fast-acting formula that not only kills weeds, but it also helps repair lawns. If you apply the product when the temperature is below 60F, it could cause damage to your grass. The ideal time to apply Scotts WinterGuard is when temperatures are above 60F and after a frost has passed.
If you’re heading out to purchase Scotts Winterguard weed and feed, it’s important to know when is the best time to apply. This will be determined by several factors: how cold it is outside, how close the product is to its expiration date, etc. We’ll go over all of that here so you can have peace of mind when buying your next bottle.
We hope this guide has helped you find the best time to apply Scotts Winterguard weed and feed. If you have any questions about any of these products or how to use them, feel free to contact us.